I believe everyone knows that laser leveling machines are developed in response to the increasing demand for ground quality such as strength, flatness, and levelness in modern industrial plants, large shopping malls, warehouses, and other large-area cement concrete floors. developed. It is a device that uses laser as the reference plane and controls the leveling head in real time to achieve high-precision and rapid leveling of concrete. Next, I will introduce to you what are the inspection and maintenance methods of laser leveling machine?
▼Check the connection and tightening of the laser leveling machine components, check whether the connecting bolts are loose or broken, and tighten or replace them if necessary. Check for leaks and eliminate leaks in all parts promptly. Pay attention to the amount of engine oil, fuel, coolant and hydraulic oil, and add new oil to the oil indicator scale as needed.
▼It should be noted that it is not possible to work under a larger load than the machine can bear, and the machine should be used within its capabilities. As a manager of a concrete screed, when an operator is designated, the random information and operation manual of the laser screed should be handed over to the operator so that they can normally control the mechanical performance and operating procedures, and relevant information should not be given at will. .
▼It is necessary to increase and decrease the mechanical load as evenly as possible to keep the machine in a relatively gentle load change. Specifically, it is necessary to increase and decrease the throttle more evenly to prevent the engine from rising and falling.
▼There will be a lot of dust and soil in the laser leveling machine after construction. First, the concrete screed should be wiped clean of dust and dust and oil stains should be wiped away with tissue paper or cotton cloth.
▼If the laser signal is lost during the construction process of the laser leveling machine, the machine needs to be restarted and the interval should be greater than ten seconds.
▼If there are too many stains, you can use a soft cloth dipped in water diluted with neutral detergent and squeeze them to clean. Manufacturers of laser leveling machines remind you to remember that volatile oil, thinner, gasoline and other chemicals cannot be used for cleaning and wiping.